一、下载FC HBA卡驱动
下载地址：
https://www.broadcom.cn/support/download-search?pg=Legacy+Products&pf=Legacy+FC+Host+Bus+Adapters&pn=LPe16002B+FC+Host+Bus+Adapter&pa=Driver&po=&dk=&pl=&l=false
二、下载FC HBA卡固件
下载地址：
https://www.broadcom.cn/support/download-search?pg=Legacy+Products&pf=Legacy+FC+Host+Bus+Adapters&pn=LPe16002B+FC+Host+Bus+Adapter&pa=Firmware&po=&dk=&pl=&l=false
三、下载FC HBA卡固件刷写工具
下载地址：
https://www.broadcom.cn/support/download-search?pg=Legacy+Products&pf=Legacy+FC+Host+Bus+Adapters&pn=LPe16002B+FC+Host+Bus+Adapter&pa=Management+Software+and+Tools&po=&dk=&pl=&l=false
四、安装CentOS 7.9及配置本地yum源
1、采用U盘安装系统，选择Minimal Install，安装过程略。
2、创建本地系统文件目录
# mkdir /media/CentOS3、将系统安装文件全部复制到“/media/CentOS”目录
注释：不是复制系统的ISO镜像文件，可以将安装系统U盘中的全部文件复制到“/media/CentOS”目录。
4、备份、移除其他repo
# cd /etc/yum.repos.d/
# tar zcvf repo-bak.tgz CentOS-*
# rm -f CentOS-Base.repo CentOS-CR.repo CentOS-Debuginfo.repo CentOS-fasttrack.repo CentOS-Sources.repo CentOS-Vault.repo CentOS-x86_64-kernel.repo5、配置本地yum源
# vi CentOS-Media.repo| [c7-media] name=CentOS-$releasever - Media baseurl=file:///media/CentOS/ file:///media/cdrom/ file:///media/cdrecorder/ gpgcheck=1 enabled=0 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7 |
将以上的内容修改如下并保存
| [c7-media] name=CentOS-$releasever - Media baseurl=file:///media/CentOS/ gpgcheck=1 enabled=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7 |
6、制作cache
# yum clean all
# yum makecache7、刷写固件必须的软件包
# cd /media/CentOS/Packages
# yum install libnl -y五、安装FC HBA卡驱动
1、安装驱动
# tar -zxvf elx-lpfc-dd-rhel7-12.8.614.22-ds-2.tar.gz
# cd elx-lpfc-dd-rhel7-12.8.614.22-ds-2| [root@localhost elx-lpfc-dd-rhel7-12.8.614.22-ds]# ./elx_lpfc_install.sh Unpacking lpfc installation files... Installing lpfc package, lpfc-rhel7-12.8.614.22-ds/kmod-elx-lpfc-12.8.614.22-1.rhel7u9.x86_64.rpm ... warning: lpfc-rhel7-12.8.614.22-ds/kmod-elx-lpfc-12.8.614.22-1.rhel7u9.x86_64.rpm: Header V4 DSA/SHA1 Signature, key ID 9fefeb11: NOKEY Preparing... ################################# [100%] Updating / installing... 1:kmod-elx-lpfc-12.8.614.22-1.rhel7################################# [100%] Installing elx-lpfc-extras package, elx-lpfc-extras-12.8.614.23-1.rhel7.noarch.rpm ... warning: elx-lpfc-extras-12.8.614.23-1.rhel7.noarch.rpm: Header V4 DSA/SHA1 Signature, key ID 9fefeb11: NOKEY Preparing... ################################# [100%] Updating / installing... 1:elx-lpfc-extras-12.8.614.23-1.rhe################################# [100%] Unloaded driver lpfc Loaded driver lpfc lpfc installation complete |
2、重启服务器
# reboot3、查看驱动信息
# modinfo lpfc| [root@localhost ~]# modinfo lpfc filename: /lib/modules/3.10.0-1160.el7.x86_64/extra/elx-lpfc/lpfc.ko supported: external retpoline: Y version: 0:12.8.614.22 author: Broadcom description: Emulex LightPulse Fibre Channel SCSI driver 12.8.614.22 license: GPL v2 retpoline: Y rhelversion: 7.9 srcversion: EDA94E79A0308788062C406 alias: pci:v000010DFd0000F400sv*sd*bc*sc*i* alias: pci:v000010DFd0000E300sv*sd*bc*sc*i* alias: pci:v000010DFd0000E268sv*sd*bc*sc*i* alias: pci:v000010DFd0000E208sv*sd*bc*sc*i* alias: pci:v000010DFd0000E260sv*sd*bc*sc*i* alias: pci:v000010DFd0000E200sv*sd*bc*sc*i* alias: pci:v000010DFd0000FC40sv*sd*bc*sc*i* alias: pci:v000010DFd0000F111sv*sd*bc*sc*i* alias: pci:v000010DFd0000F112sv*sd*bc*sc*i* alias: pci:v000010DFd0000F011sv*sd*bc*sc*i* alias: pci:v000010DFd0000F015sv*sd*bc*sc*i* alias: pci:v000010DFd0000F100sv*sd*bc*sc*i* depends: nvme-fc,scsi_transport_fc,nvmet-fc,crc-t10dif vermagic: 3.10.0-1160.el7.x86_64 SMP mod_unload modversions signer: Broadcom Inc.: Emulex Connectivity Division sig_key: D1:7E:CA:BC:92:CD:49:09:89:95:9B:37:F0:5F:0E:DA:48:C5:38:95 sig_hashalgo: sha256 parm: lpfc_debugfs_enable:Enable debugfs services (int) parm: lpfc_debugfs_max_disc_trc:Set debugfs discovery trace depth (int) parm: lpfc_debugfs_max_slow_ring_trc:Set debugfs slow ring trace depth (int) parm: lpfc_debugfs_max_nvmeio_trc:Set debugfs NVME IO trace depth (int) parm: lpfc_debugfs_mask_disc_trc:Set debugfs discovery trace mask (int) parm: lpfc_enable_nvmet:Enable HBA port(s) WWPN as a NVME Target (array of ulong) parm: lpfc_poll:FCP ring polling mode control: 0 - none, 1 - poll with interrupts enabled 3 - poll and disable FCP ring interrupts (int) parm: lpfc_no_hba_reset:WWPN of HBAs that should not be reset (array of ulong) parm: lpfc_sli_mode:SLI mode selector: 0 - auto (SLI-3 if supported), 2 - select SLI-2 even on SLI-3 capable HBAs, 3 - select SLI-3 (uint) parm: lpfc_enable_npiv:Enable NPIV functionality (uint) parm: lpfc_fcf_failover_policy:FCF Fast failover=1 Priority failover=2 (uint) parm: lpfc_enable_fcp_priority:Enable/disable, (1,0) FCP Priority (uint) parm: lpfc_enable_rrq:Enable RRQ functionality (uint) parm: lpfc_suppress_link_up:Suppress Link Up at initialization (uint) parm: lpfc_nodev_tmo:Seconds driver will hold I/O waiting for a device to come back (int) parm: lpfc_devloss_tmo:Seconds driver will hold I/O waiting for a device to come back (int) parm: lpfc_suppress_rsp:Enable suppress rsp feature is firmware supports it (uint) parm: lpfc_nvmet_mrq:Specify number of RQ pairs for processing NVMET cmds (uint) parm: lpfc_nvmet_mrq_post:Specify number of RQ buffers to initially post (uint) parm: lpfc_enable_fc4_type:Enable FC4 Protocol support - FCP / NVME (uint) parm: lpfc_log_verbose:Verbose logging bit-mask (uint) parm: lpfc_enable_da_id:Deregister nameserver objects before LOGO (uint) parm: lpfc_lun_queue_depth:Max number of FCP commands we can queue to a specific LUN (ushort) parm: lpfc_tgt_queue_depth:Set max Target queue depth (uint) parm: lpfc_hba_queue_depth:Max number of FCP commands we can queue to a lpfc HBA (uint) parm: lpfc_peer_port_login:Allow peer ports on the same physical port to login to each other. (uint) parm: lpfc_restrict_login:Restrict virtual ports login to remote initiators. (int) parm: lpfc_scan_down:Start scanning for devices from highest ALPA to lowest (uint) parm: lpfc_topology:Select Fibre Channel topology (uint) parm: lpfc_link_speed:Select link speed (int) parm: lpfc_aer_support:Enable PCIe device AER support (uint) parm: lpfc_sriov_nr_virtfn:Enable PCIe device SR-IOV virtual fn (uint) parm: lpfc_req_fw_upgrade:Enable Linux generic firmware upgrade (int) parm: lpfc_force_rscn:Force an RSCN to be sent to all remote NPorts (int) parm: lpfc_fcp_imax:Set the maximum number of FCP interrupts per second per HBA (int) parm: lpfc_cq_poll_threshold:CQE Processing Threshold to enable Polling (uint) parm: lpfc_cq_max_proc_limit:Set the maximum number CQEs processed in an iteration of CQ processing (int) parm: lpfc_fcp_cpu_map:Defines how to map CPUs to IRQ vectors per HBA (int) parm: lpfc_fcp_class:Select Fibre Channel class of service for FCP sequences (uint) parm: lpfc_use_adisc:Use ADISC on rediscovery to authenticate FCP devices (uint) parm: lpfc_first_burst_size:First burst size for Targets that support first burst (uint) parm: lpfc_nvmet_fb_size:NVME Target mode first burst size in 512B increments. (uint) parm: lpfc_nvme_enable_fb:Enable First Burst feature for NVME Initiator. (uint) parm: lpfc_max_scsicmpl_time:Use command completion time to control queue depth (uint) parm: lpfc_ack0:Enable ACK0 support (uint) parm: lpfc_xri_rebalancing:Enable/Disable XRI rebalancing (uint) parm: lpfc_fcp_io_sched:Determine scheduling algorithm for issuing commands [0] - Hardware Queue, [1] - Current CPU (uint) parm: lpfc_ns_query:Determine algorithm NameServer queries after RSCN [0] - GID_FT, [1] - GID_PT (uint) parm: lpfc_fcp2_no_tgt_reset:Determine bus reset behavior for FCP2 devices [0] - issue tgt reset, [1] - no tgt reset (uint) parm: lpfc_cr_delay:A count of milliseconds after which an interrupt response is generated (uint) parm: lpfc_cr_count:A count of I/O completions after which an interrupt response is generated (uint) parm: lpfc_multi_ring_support:Determines number of primary SLI rings to spread IOCB entries across (uint) parm: lpfc_multi_ring_rctl:Identifies RCTL for additional ring configuration (uint) parm: lpfc_multi_ring_type:Identifies TYPE for additional ring configuration (uint) parm: lpfc_enable_SmartSAN:Enable SmartSAN functionality (uint) parm: lpfc_fdmi_on:Enable FDMI support (uint) parm: lpfc_enable_e2e:E2E: 1=enable 0=disable. Change only under direction of Emulex Tech. Support (uint) parm: lpfc_discovery_threads:Maximum number of ELS commands during discovery (uint) parm: lpfc_max_luns:Maximum allowed LUN ID (uint) parm: lpfc_poll_tmo:Milliseconds driver will wait between polling FCP ring (uint) parm: lpfc_task_mgmt_tmo:Maximum time to wait for task management commands to complete (uint) parm: lpfc_use_msi:Use Message Signaled Interrupts (1) or MSI-X (2), if possible (uint) parm: lpfc_nvme_oas:Use OAS bit on NVME IOs (uint) parm: lpfc_nvme_embed_cmd:Embed NVME Command in WQE (uint) parm: lpfc_fcp_mq_threshold:Set the number of SCSI Queues advertised (uint) parm: lpfc_hdw_queue:Set the number of I/O Hardware Queues (uint) parm: lpfc_irq_chann:Set number of interrupt vectors to allocate (uint) parm: lpfc_enable_hba_reset:Enable HBA resets from the driver. (uint) parm: lpfc_enable_hba_heartbeat:Enable HBA Heartbeat. (uint) parm: lpfc_EnableXLane:Enable Express Lane Feature. (uint) parm: lpfc_XLanePriority:CS_CTL for Express Lane Feature. (uint) parm: lpfc_enable_bg:Enable BlockGuard Support (uint) parm: lpfc_external_dif:External T10-DIF Support, on select HBAs (uint) parm: lpfc_prot_mask:T10-DIF host protection capabilities mask (uint) parm: lpfc_prot_guard:T10-DIF host protection guard type (uint) parm: lpfc_delay_discovery:Delay NPort discovery when Clean Address bit is cleared. (uint) parm: lpfc_sg_seg_cnt:Max Scatter Gather Segment Count (uint) parm: lpfc_throttle_log_cnt:Do not exceed this number of messages logged within throttle_log_time (uint) parm: lpfc_throttle_log_time:Do not exceed throttle_log_cnt within this limit (seconds) (uint) parm: lpfc_enable_mds_diags:Enable MDS Diagnostics (uint) parm: lpfc_ras_fwlog_buffsize:Host memory for FW logging (uint) parm: lpfc_ras_fwlog_level:Firmware Logging Level (uint) parm: lpfc_ras_fwlog_func:Firmware Logging Enabled on Function (uint) parm: lpfc_enable_bbcr:Enable BBC Recovery (uint) parm: lpfc_fabric_cgn_frequency:Congestion signaling primitive freq (int) parm: lpfc_acqe_cgn_frequency:Congestion signaling ACQE freq (int) parm: lpfc_use_cgn_signal:Use Congestion signaling if available (int) parm: lpfc_enable_dpp:Enable Direct Packet Push (uint) parm: lpfc_enable_scsi_mq:Enable SCSI MQ support in LPFC (uint) parm: lpfc_enable_auth:Enable DH-CHAP Authentication (uint) |
六、刷写FC HBA卡固件
1、解压固件刷写工具
# unzipelxflashStandalone-linux-12.8.351.51-1.zip2、将下载的固件复制到elxflashStandalone-linux-12.8.351.51-1/firmware目录下
# cp lancer_A12.8.614.27.grp elxflashStandalone-linux-12.8.351.51-1/firmware3、查看FC HBA卡固件信息
# cd elxflashStandalone-linux-12.8.351.51-1/lx
# ./elxflash.sh /q| [root@localhost lx]# ./elxflash.sh /q HBA=LPe16002, Port Type=FC, WWN=10:00:00:10:9B:61:2B:3C, PCI ID=E200, VID=10DF, SSID=E280, SVID=10DF, Firmware=12.0.261.9, Boot Code=12.0.261.9, Boot Enabled=1 HBA=LPe16002, Port Type=FC, WWN=10:00:00:10:9B:61:2B:3D, PCI ID=E200, VID=10DF, SSID=E280, SVID=10DF, Firmware=12.0.261.9, Boot Code=12.0.261.9, Boot Enabled=1 elxflash: All required queries succeeded - Return Code=0 |
4、刷写FC HBA卡固件
# ./elxflash.sh /auto /update| [root@localhost lx]# ./elxflash.sh /auto /update Wed May 24 00:26:37 2023 HBA=LPe16002, Port Type=FC, WWN=10:00:00:10:9B:61:2B:3C, Update=Firmware, Image=lancer_A12.8.614.27.grp, New=12.8.614.27, Old=12.0.261.9, Status=Success, Firmware Status="Reboot the system to activate new firmware." Wed May 24 00:26:37 2023 HBA=LPe16002, Port Type=FC, WWN=10:00:00:10:9B:61:2B:3D, Update=Firmware, Image=lancer_A12.8.614.27.grp, New=12.8.614.27, Old=12.0.261.9, Status=Success, Firmware Status="Reboot the system to activate new firmware." elxflash: All required updates succeeded - Return Code=0 Please reboot system to activate new firmware. |
5、重启服务器
# reboot6、查看FC HBA卡固件信息
# ./elxflash.sh /q| [root@localhost lx]# ./elxflash.sh /q HBA=LPe16002, Port Type=FC, WWN=10:00:00:10:9B:61:2B:3C, PCI ID=E200, VID=10DF, SSID=E280, SVID=10DF, Firmware=12.8.614.27, Boot Code=12.8.614.27, Boot Enabled=1 HBA=LPe16002, Port Type=FC, WWN=10:00:00:10:9B:61:2B:3D, PCI ID=E200, VID=10DF, SSID=E280, SVID=10DF, Firmware=12.8.614.27, Boot Code=12.8.614.27, Boot Enabled=1 elxflash: All required queries succeeded - Return Code=0 |