Bootstrap

kernel起来后报错

DDR Version 1.08 20190523
In
Channel a: DDR3 400MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Channel b: DDR3 400MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Memory OK
Memory OK
OUT
Boot1 Release Time: Nov 27 2019 15:30:08, version: 2.58
ChipType = 0x8, 249
mmc2:cmd19,100
SdmmcInit=2 0
BootCapSize=2000
UserCapSize=7456MB
FwPartOffset=2000 , 2000
mmc0:cmd8,400
mmc0:cmd8,400
mmc0:cmd8,400
SdmmcInit=0 1
StorageInit ok = 26463
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT part:  0, name:            uboot, start:0x4000, size:0x2000
GPT part:  1, name:            trust, start:0x6000, size:0x2000
GPT part:  2, name:             misc, start:0x8000, size:0x2000
GPT part:  3, name:         resource, start:0xa000, size:0x8000
GPT part:  4, name:           kernel, start:0x12000, size:0x10000
GPT part:  5, name:              dtb, start:0x22000, size:0x2000
GPT part:  6, name:             dtbo, start:0x24000, size:0x2000
GPT part:  7, name:           vbmeta, start:0x26000, size:0x800
GPT part:  8, name:             boot, start:0x26800, size:0x10000
GPT part:  9, name:         recovery, start:0x36800, size:0x20000
GPT part: 10, name:           backup, start:0x56800, size:0x38000
GPT part: 11, name:         security, start:0x8e800, size:0x2000
GPT part: 12, name:            cache, start:0x90800, size:0x8000
GPT part: 13, name:           system, start:0x98800, size:0x200000
GPT part: 14, name:         metadata, start:0x298800, size:0x2000
GPT part: 15, name:           vendor, start:0x29a800, size:0x80000
GPT part: 16, name:              oem, start:0x31a800, size:0x2000
GPT part: 17, name:              frp, start:0x31c800, size:0x400
GPT part: 18, name:         userdata, start:0x31cc00, size:0xb733df
find part:uboot OK. first_lba:0x4000.
find part:trust OK. first_lba:0x6000.
LOADER Check OK! 0x4000, 204375
TOS    Check OK! 0x6000, 240737
Enter Trust OS
INF [0x0] TEE-CORE:init_primary_helper:385: Core0 Initializing (1.1.0-415-g1d667fcf #55 Mon Nov 18 06:45:10 UTC 2019 arm)

INF [0x0] TEE-CORE:init_primary_helper:386: Release version: 1.3

INF [0x0] TEE-CORE:init_primary_helper:387: Next entry point address: 0x200000

INF [0x0] TEE-CORE:init_teecore:83: teecore inits done


U-Boot 2017.09-00008-gf16aaf370e (May 12 2022 - 10:42:51 +0800)

Model: Evb-RK3288
PreSerial: 2
DRAM:  2 GiB
Sysmem: init
Relocation Offset: 00000000, fdt: 7be24c9c
Using default environment

dwmmc@ff0c0000: 1, dwmmc@ff0f0000: 0
Bootdev(atags): mmc 0
MMC0: High Speed, 52Mhz
PartType: EFI
Android 9.0, Build 2020.3
boot mode: recovery (misc)
Found DTB in recovery part
DTB: rk-kernel.dtb
ANDROID: fdt overlay OK
I2c0 speed: 400000Hz
Warn: can't find connect driver
Failed to found available display route
Warn: can't find connect driver
Failed to found available display route
CLK: (uboot. arm: enter 1000000 KHz, init 1000000 KHz, kernel 0N/A)
  apll 1000000 KHz
  dpll 396000 KHz
  cpll 384000 KHz
  gpll 594000 KHz
  npll 24000 KHz
  aclk_bus 297000 KHz
Net:   Net Initialization Skipped
No ethernet found.
Hit key to stop autoboot('CTRL+C'):  0 
ANDROID: reboot reason: "recovery"
Vboot=0, AVB images, AVB verify
read_is_device_unlocked() ops returned that device is UNLOCKED
avb_slot_verify.c:754: ERROR: vbmeta: Error verifying vbmeta image: OK_NOT_SIGNED
Booting IMAGE kernel at 0x02008000 with fdt at 0x8300000...


## Booting Android Image at 0x02007800 ...
Kernel load addr 0x02008000 size 8184 KiB
RAM disk load addr 0x0a200000 size 8593 KiB
## Flattened Device Tree blob at 08300000
   Booting using the fdt blob at 0x8300000
   XIP Kernel Image ... OK
  'reserved-memory' dma-unusable@fe000000: addr=fe000000 size=1000000
  'reserved-memory' ramoops@00000000: addr=8000000 size=f0000
   Loading Ramdisk to 0f79b000, end 0ffff298 ... OK
   Loading Device Tree to 0f783000, end 0f79a202 ... OK
Adding bank: 0x00000000 - 0x08400000 (size: 0x08400000)
Adding bank: 0x09200000 - 0x80000000 (size: 0x76e00000)
Total: 1964.808 ms

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x500
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.185 (liuyuan@boardcon) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05) ) #3 SMP PREEMPT Thu May 12 11:59:02 CST 2022
[    0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: rockchip,rk3288w
[    0.000000] earlycon: Early serial console at MMIO32 0xff690000 (options '')
[    0.000000] bootconsole [uart0] enabled
[    0.000000] Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x00000000, size 0 MiB
[    0.000000] cma: Reserved 16 MiB at 0x7f000000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv65535.65535 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] PERCPU: Embedded 13 pages/cpu @df585000 s23884 r8192 d21172 u53248
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519534
[    0.000000] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal  androidboot.dtbo_idx=0 root=PARTUUID=af01642c-9b84-11e8-9b2a-234eb5e198a0 androidboot.verifiedbootstate=orange androidboot.slot_suffix= androidboot.serialno=GC3F84X3V3 console=ttyFIQ0 androidboot.baseband=N/A androidboot.selinux=permissive androidboot.wificountrycode=US androidboot.veritymode=enforcing androidboot.hardware=rk30board androidboot.console=ttyFIQ0 firmware_class.path=/vendor/etc/firmware init=/init root=PARTUUID=af01642c-9b84-11e8-9b2a-234eb5e198a0 earlycon=uart8250,mmio32,0xff690000 vmalloc=496M
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 2017824K/2082816K available (10240K kernel code, 1191K rwdata, 4136K rodata, 1024K init, 2166K bss, 48608K reserved, 16384K cma-reserved, 1548288K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xe1000000 - 0xff800000   ( 488 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0800000   ( 520 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0b00000   (11232 kB)
[    0.000000]       .init : 0xc1000000 - 0xc1100000   (1024 kB)
[    0.000000]       .data : 0xc1100000 - 0xc1229c20   (1192 kB)
[    0.000000]        .bss : 0xc122b000 - 0xc1448814   (2167 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.008797] Switching to timer-based delay loop, resolution 41ns
[    0.017677] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[    0.028974] pid_max: default: 32768 minimum: 301
[    0.034129] Security Framework initialized
[    0.038645] SELinux:  Initializing.
[    0.042594] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.049883] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.058459] Initializing cgroup subsys memory
[    0.063302] Initializing cgroup subsys freezer
[    0.068253] CPU: Testing write buffer coherency: ok
[    0.074013] CPU0: update cpu_capacity 430
[    0.078458] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500
[    0.084771] Setting up static identity map for 0x100000 - 0x100058
[    0.122197] CPU1: update cpu_capacity 430
[    0.122207] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501
[    0.132272] CPU2: update cpu_capacity 430
[    0.132281] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502
[    0.142362] CPU3: update cpu_capacity 430
[    0.142371] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503
[    0.142508] Brought up 4 CPUs
[    0.177643] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[    0.184533] CPU: All CPU(s) started in SVC mode.
[    0.191878] devtmpfs: initialized
[    0.225245] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0
[    0.234254] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.245010] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.253037] pinctrl core: initialized pinctrl subsystem
[    0.260238] NET: Registered protocol family 16
[    0.268549] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.289549] cpuidle: using governor ladder
[    0.304138] cpuidle: using governor menu
[    0.308501] Registered FIQ tty driver
[    0.357389] console [pstore-1] enabled
[    0.361845] pstore: Registered ramoops as persistent store backend
[    0.368672] ramoops: attached 0xf0000@0x8000000, ecc: 0/0
[    0.377194] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.386022] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.393422] fiq debugger fiq mode enabled
[[    0.398293] console [ttyFIQ0] enabled
    0.398293] console [ttyFIQ0] enabled
[    0.406012] bootconsole [uart0] disabled
[    0.406012] bootconsole [uart0] disabled
[    0.410687] Registered fiq debugger ttyFIQ0
[    0.470634] vcc_sd: regulator get failed, ret=-517
[    0.471429] vcc_lcd: regulator get failed, ret=-517
[    0.472124] vcc_wl: regulator get failed, ret=-517
[    0.472637] iommu: Adding device ff900000.iep to group 0
[    0.472777] iommu: Adding device ff910000.isp to group 1
[    0.472912] iommu: Adding device ff930000.vop to group 2
[    0.473044] iommu: Adding device ff940000.vop to group 3
[    0.473187] iommu: Adding device ff9a0000.vpu-service to group 4
[    0.473334] iommu: Adding device ff9c0000.hevc-service to group 5
[    0.473973] rk_iommu ff900800.iommu: can't get aclk
[    0.474001] rk_iommu ff900800.iommu: can't get hclk
[    0.474021] rk_iommu ff900800.iommu: can't get sclk
[    0.474394] rk_iommu ff914000.iommu: can't get sclk
[    0.474905] rk_iommu ff930300.iommu: can't get sclk
[    0.475299] rk_iommu ff940300.iommu: can't get sclk
[    0.475640] rk_iommu ff9a0800.iommu: can't get sclk
[    0.476033] rk_iommu ff9c0440.iommu: can't get sclk
[    0.476663] SCSI subsystem initialized
[    0.477023] usbcore: registered new interface driver usbfs
[    0.477117] usbcore: registered new interface driver hub
[    0.477253] usbcore: registered new device driver usb
[    0.477984] rk3288-dwc-control-usb ff770284.dwc-control-usb: host_drv_gpio is not specified or invalid
[    0.479966] media: Linux media interface: v0.10
[    0.480067] Linux video capture interface: v2.00
[    0.480438] pps_core: LinuxPPS API ver. 1 registered
[    0.480457] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.480512] PTP clock support registered
[    0.483161] Advanced Linux Sound Architecture Driver Initialized.
[    0.484060] Bluetooth: Core ver 2.21
[    0.484133] NET: Registered protocol family 31
[    0.484151] Bluetooth: HCI device and connection manager initialized
[    0.484238] Bluetooth: HCI socket layer initialized
[    0.484260] Bluetooth: L2CAP socket layer initialized
[    0.484350] Bluetooth: SCO socket layer initialized
[    0.486108] rockchip-cpuinfo cpuinfo: Serial		: 2f162aff922ae476
[    0.488485] clocksource: Switched to clocksource arch_sys_counter
[    0.574512] rga: Module initialized.
[    0.577499] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[    0.577937] NET: Registered protocol family 2
[    0.579013] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.579098] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.579206] TCP: Hash tables configured (established 4096 bind 4096)
[    0.579308] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.579348] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.579608] NET: Registered protocol family 1
[    0.580672] Trying to unpack rootfs image as initramfs...
[    0.975844] rk_battery_charger_detect_cb , battery_charger_detect 2
[    1.216198] Freeing initrd memory: 8596K
[    1.218681] hw perfevents: enabled with armv7_cortex_a12 PMU driver, 7 counters available
[    1.224141] audit: initializing netlink subsys (disabled)
[    1.224268] audit: type=2000 audit(1.090:1): initialized
[    1.233390] VFS: Disk quotas dquot_6.6.0
[    1.233633] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.235302] Registering sdcardfs 0.1
[    1.235683] fuse init (API version 7.23)
[    1.238252] 
[    1.238252] TEE Core Framework initialization (ver 1:0.1)
[    1.238313] TEE armv7 Driver initialization
[    1.239018] tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0"
[    1.239060] TEE core: Alloc the misc device "opteearmtz00" (id=0)
[    1.239406] TEE Core: Register the misc device "opteearmtz00" (id=0,minor=62)
[    1.247027] bounce: pool size: 64 pages
[    1.247269] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    1.247306] io scheduler noop registered
[    1.247328] io scheduler deadline registered
[    1.247517] io scheduler cfq registered (default)
[    1.253193] rockchip-dp-phy ff770000.syscon:edp-phy: No edp_24m reset control specified
[    1.255879] backlight supply power not found, using dummy regulator
[    1.256593] iep: failed to find iep power down clock source.
[    1.257269] IEP Power ON
[    1.257590] IEP Power OFF
[    1.257704] IEP Driver loaded succesfully
[    1.257946] Module initialized.
[    1.258667] rk-vcodec ff9a0000.vpu-service: no regulator for vcodec
[    1.259067] rk-vcodec ff9a0000.vpu-service: probe device
[    1.259466] rk-vcodec ff9a0000.vpu-service: drm allocator with mmu enabled
[    1.260516] rk-vcodec ff9a0000.vpu-service: could not find power_model node
[    1.260544] rk-vcodec ff9a0000.vpu-service: init success
[    1.260988] rk-vcodec ff9c0000.hevc-service: no regulator for vcodec
[    1.261417] rk-vcodec ff9c0000.hevc-service: probe device
[    1.261886] rk-vcodec ff9c0000.hevc-service: drm allocator with mmu enabled
[    1.262688] rk-vcodec ff9c0000.hevc-service: could not find power_model node
[    1.262729] rk-vcodec ff9c0000.hevc-service: init success
[    1.266134] dma-pl330 ff250000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.266183] dma-pl330 ff250000.dma-controller: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    1.267325] dma-pl330 ff600000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.267373] dma-pl330 ff600000.dma-controller: 	DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10
[    1.270653] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
[    1.271607] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 37, base_baud = 1500000) is a 16550A
[    1.272560] [drm] Initialized drm 1.1.0 20060810
[    1.279409] [drm] Rockchip DRM driver version: v1.0.1
[    1.279921] rockchip-drm display-subsystem: devfreq is not set
[    1.281506] rockchip-drm display-subsystem: bound ff930000.vop (ops vop_component_ops)
[    1.282745] rockchip-drm display-subsystem: bound ff940000.vop (ops vop_component_ops)
[    1.283134] i2c i2c-6: of_i2c: modalias failure on /hdmi@ff980000/ports
[    1.283184] dwhdmi-rockchip ff980000.hdmi: registered DesignWare HDMI I2C bus driver
[    1.283333] dwhdmi-rockchip ff980000.hdmi: Detected HDMI TX controller v2.01a with HDCP (DWC HDMI 2.0 TX PHY)
[    1.284717] rockchip-drm display-subsystem: bound ff980000.hdmi (ops dw_hdmi_rockchip_ops)
[    1.284761] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.284775] [drm] No driver support for vblank timestamp query.
[    1.284998] rockchip-drm display-subsystem: failed to parse loader memory
[    1.285069] rockchip-drm display-subsystem: No connectors reported connected with modes
[    1.285247] [drm] Cannot find any crtc or sizes - going 1024x768
[    1.297042] rockchip-drm display-subsystem: fb0:  frame buffer device
[    1.325637] mali ffa30000.gpu: Failed to get regulator
[    1.325681] mali ffa30000.gpu: Power control initialization failed
[    1.343724] brd: module loaded
[    1.353447] loop: module loaded
[    1.354565] zram: Added device: zram0
[    1.356201] SCSI Media Changer driver v0.25 
[    1.357458] tun: Universal TUN/TAP device driver, 1.6
[    1.357490] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.359243] rk_gmac-dwmac ff290000.ethernet: clock input or output? (input).
[    1.359293] rk_gmac-dwmac ff290000.ethernet: TX delay(0x30).
[    1.359322] rk_gmac-dwmac ff290000.ethernet: RX delay(0x10).
[    1.359367] rk_gmac-dwmac ff290000.ethernet: integrated PHY? (no).
[    1.359575] rk_gmac-dwmac ff290000.ethernet: cannot get clock clk_mac_speed
[    1.359607] rk_gmac-dwmac ff290000.ethernet: clock input from PHY
[    1.364640] rk_gmac-dwmac ff290000.ethernet: init for RGMII
[    1.364805] stmmac - user ID: 0x10, Synopsys ID: 0x35
[    1.364824]  Ring mode enabled
[    1.364836]  DMA HW capability register supported
[    1.364846]  Normal descriptors
[    1.364860]  RX Checksum Offload Engine supported (type 2)
[    1.364870]  TX Checksum insertion supported
[    1.364880]  Wake-Up On Lan supported
[    1.364965] rk_gmac-dwmac ff290000.ethernet: rk_get_eth_addr: rk_vendor_read eth mac address failed (-1)
[    1.365006] rk_gmac-dwmac ff290000.ethernet: rk_get_eth_addr: generate random eth mac address: 2e:61:57:4a:7e:57
[    1.365026] rk_gmac-dwmac ff290000.ethernet: rk_get_eth_addr: rk_vendor_write eth mac address failed (-1)
[    1.365062] rk_gmac-dwmac ff290000.ethernet: rk_get_eth_addr: mac address: 2e:61:57:4a:7e:57
[    1.365077] eth%d: device MAC address 2e:61:57:4a:7e:57
[    1.365089]  Enable RX Mitigation via HW Watchdog Timer
[    1.435562] libphy: stmmac: probed
[    1.435604] eth%d: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
[    1.435621] eth%d: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
[    1.437326] PPP generic driver version 2.4.2
[    1.437659] PPP BSD Compression module registered
[    1.437704] PPP Deflate Compression module registered
[    1.437757] PPP MPPE Compression module registered
[    1.437788] NET: Registered protocol family 24
[    1.437856] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[    1.437871] CSLIP: code copyright 1989 Regents of the University of California.
[    1.437898] Rockchip WiFi SYS interface (V1.00) ... 
[    1.438060] usbcore: registered new interface driver catc
[    1.438171] usbcore: registered new interface driver kaweth
[    1.438217] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[    1.438309] usbcore: registered new interface driver pegasus
[    1.438421] usbcore: registered new interface driver rtl8150
[    1.438587] usbcore: registered new interface driver r8152
[    1.438632] hso: drivers/net/usb/hso.c: Option Wireless
[    1.438748] usbcore: registered new interface driver hso
[    1.438866] usbcore: registered new interface driver asix
[    1.438964] usbcore: registered new interface driver ax88179_178a
[    1.439074] usbcore: registered new interface driver cdc_ether
[    1.439179] usbcore: registered new interface driver cdc_eem
[    1.439294] usbcore: registered new interface driver dm9601
[    1.439404] usbcore: registered new interface driver smsc75xx
[    1.439525] usbcore: registered new interface driver smsc95xx
[    1.439636] usbcore: registered new interface driver gl620a
[    1.439743] usbcore: registered new interface driver net1080
[    1.439858] usbcore: registered new interface driver plusb
[    1.439964] usbcore: registered new interface driver rndis_host
[    1.440082] usbcore: registered new interface driver cdc_subset
[    1.440179] usbcore: registered new interface driver zaurus
[    1.440293] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[    1.440417] usbcore: registered new interface driver int51x1
[    1.440533] usbcore: registered new interface driver kalmia
[    1.440631] usbcore: registered new interface driver ipheth
[    1.440740] usbcore: registered new interface driver sierra_net
[    1.440839] usbcore: registered new interface driver cx82310_eth
[    1.440973] usbcore: registered new interface driver cdc_ncm
[    1.441090] usbcore: registered new interface driver qmi_wwan
[    1.441190] usbcore: registered new interface driver cdc_mbim
[    1.441566] ff540000.usb supply vusb_d not found, using dummy regulator
[    1.441708] ff540000.usb supply vusb_a not found, using dummy regulator
[    1.549130] dwc2 ff540000.usb: DWC OTG Controller
[    1.549200] dwc2 ff540000.usb: new USB bus registered, assigned bus number 1
[    1.549254] dwc2 ff540000.usb: irq 43, io mem 0xff540000
[    1.549619] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.549658] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.549676] usb usb1: Product: DWC OTG Controller
[    1.549693] usb usb1: Manufacturer: Linux 4.4.185 dwc2_hsotg
[    1.549709] usb usb1: SerialNumber: ff540000.usb
[    1.550679] hub 1-0:1.0: USB hub found
[    1.550797] hub 1-0:1.0: 1 port detected
[    1.552721] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.552768] ehci-platform: EHCI generic platform driver
[    1.553157] ehci-platform ff500000.usb: EHCI Host Controller
[    1.553511] ehci-platform ff500000.usb: new USB bus registered, assigned bus number 2
[    1.553787] ehci-platform ff500000.usb: irq 41, io mem 0xff500000
[    1.561886] ehci-platform ff500000.usb: USB 2.0 started, EHCI 1.00
[    1.562182] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.562220] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.562239] usb usb2: Product: EHCI Host Controller
[    1.562268] usb usb2: Manufacturer: Linux 4.4.185 ehci_hcd
[    1.562285] usb usb2: SerialNumber: ff500000.usb
[    1.563197] hub 2-0:1.0: USB hub found
[    1.563290] hub 2-0:1.0: 1 port detected
[    1.564297] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.564372] ohci-platform: OHCI generic platform driver
[    1.564719] ohci-platform ff520000.usb: Generic Platform OHCI controller
[    1.565120] ohci-platform ff520000.usb: new USB bus registered, assigned bus number 3
[    1.565394] ohci-platform ff520000.usb: irq 42, io mem 0xff520000
[    1.622800] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.622839] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.622858] usb usb3: Product: Generic Platform OHCI controller
[    1.622874] usb usb3: Manufacturer: Linux 4.4.185 ohci_hcd
[    1.622889] usb usb3: SerialNumber: ff520000.usb
[    1.623844] hub 3-0:1.0: USB hub found
[    1.623949] hub 3-0:1.0: 1 port detected
[    1.624960] usbcore: registered new interface driver cdc_acm
[    1.624994] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    1.625189] usbcore: registered new interface driver usblp
[    1.625329] usbcore: registered new interface driver cdc_wdm
[    1.625528] usbcore: registered new interface driver usb-storage
[    1.625650] usbcore: registered new interface driver ums-alauda
[    1.625768] usbcore: registered new interface driver ums-cypress
[    1.625871] usbcore: registered new interface driver ums-datafab
[    1.625994] usbcore: registered new interface driver ums-freecom
[    1.626095] usbcore: registered new interface driver ums-isd200
[    1.626210] usbcore: registered new interface driver ums-jumpshot
[    1.626313] usbcore: registered new interface driver ums-karma
[    1.626428] usbcore: registered new interface driver ums-onetouch
[    1.626543] usbcore: registered new interface driver ums-sddr09
[    1.626646] usbcore: registered new interface driver ums-sddr55
[    1.626771] usbcore: registered new interface driver ums-usbat
[    1.626941] usbcore: registered new interface driver usbserial
[    1.627042] usbcore: registered new interface driver usbserial_generic
[    1.627117] usbserial: USB Serial support registered for generic
[    1.627226] usbcore: registered new interface driver option
[    1.627287] usbserial: USB Serial support registered for GSM modem (1-port)
[    1.627569] usbcore: registered new interface driver trancevibrator
[    1.627611] usb20_otg: version 3.10a 21-DEC-2012
[    1.628143] e1700040
[    1.628174] Core Release: 3.10a
[    1.628188] Setting default values for core params
[    1.628546] Using Buffer DMA mode
[    1.628580] Periodic Transfer Interrupt Enhancement - disabled
[    1.628608] Multiprocessor Interrupt Enhancement - disabled
[    1.628622] OTG VER PARAM: 0, OTG VER FLAG: 0
[    1.628634] ^^^^^^^^^^^^^^^^^Device Mode
[    1.628655] Dedicated Tx FIFOs mode
[    1.628682] pcd_init otg_dev = cfa0f680
[    1.629179] usb20_otg ff580000.usb: DWC OTG Controller
[    1.629550] usb20_otg ff580000.usb: new USB bus registered, assigned bus number 4
[    1.629633] usb20_otg ff580000.usb: irq 44, io mem 0x00000000
[    1.629897] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    1.629923] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.629952] usb usb4: Product: DWC OTG Controller
[    1.629969] usb usb4: Manufacturer: Linux 4.4.185 dwc_otg_hcd
[    1.629985] usb usb4: SerialNumber: ff580000.usb
[    1.630862] hub 4-0:1.0: USB hub found
[    1.630953] hub 4-0:1.0: 1 port detected
[    1.632088] usb20_host: version 3.10a 21-DEC-2012
[    1.633561] usbcore: registered new interface driver xpad
[    1.634510] sensor_register_slave:mma8452,id=17
[    1.634560] sensor_register_slave:lis3dh,id=7
[    1.634594] sensor_register_slave:mma7660,id=18
[    1.634618] sensor_register_slave:lsm303d,id=22
[    1.634640] sensor_register_slave:gs_mc3230,id=23
[    1.634652] [Gsensor]   gsensor_init
[    1.634674] sensor_register_slave:mpu6880_acc,id=24
[    1.634697] sensor_register_slave:mpu6500_acc,id=25
[    1.634719] sensor_register_slave:lsm330_acc,id=26
[    1.634742] sensor_register_slave:akm8975,id=30
[    1.634765] sensor_register_slave:akm8963,id=31
[    1.634797] sensor_register_slave:l3g4200d,id=45
[    1.634820] sensor_register_slave:l3g20d,id=46
[    1.634843] sensor_register_slave:ewtsa,id=47
[    1.634866] sensor_register_slave:lsm330_gyro,id=51
[    1.634887] sensor_register_slave:cm3217,id=53
[    1.634909] sensor_register_slave:cm3218,id=54
[    1.636947] i2c /dev entries driver
[    1.639034] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[    1.639162] fan53555-reg: supplied by vcc_sys
[    1.642581] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[    1.642700] fan53555-reg: supplied by vcc_sys
[    1.648634] rtc-hym8563 0-0051: rtc core: registered hym8563 as rtc0
[    1.649782] REG1: supplied by vcc_sys
[    1.651190] REG2: supplied by vcc_sys
[    1.652534] vcc_sd: supplied by VCC_IO
[    1.652831] vcc_lcd: supplied by VCC_IO
[    1.653196] REG3: supplied by vcc_sys
[    1.654554] REG4: supplied by vcc_sys
[    1.655908] REG5: supplied by VCC_IO
[    1.657464] REG6: supplied by VCC_IO
[    1.658965] REG7: supplied by VCC_IO
[    1.660478] REG8: supplied by vcc_sys
[    1.661935] REG9: supplied by vcc_sys
[    1.663280] REG10: supplied by VCC_20
[    1.664701] REG11: supplied by VCC_20
[    1.666164] vcc_wl: supplied by VCC_18
[    1.666485] REG12: supplied by VCC_20
[    1.667942] rk3x-i2c ff650000.i2c: Initialized RK3xxx I2C bus at e15cc000
[    1.669189] rk3x-i2c ff140000.i2c: Initialized RK3xxx I2C bus at e15ce000
[    1.670081] rk3x-i2c ff150000.i2c: Initialized RK3xxx I2C bus at e15d0000
[    1.671972] input: gsl3673 as /devices/platform/ff160000.i2c/i2c-4/4-0040/input/input0
[    1.728624] dwc_otg_hcd_suspend, usb device mode
[    1.731940] gsl3673 4-0040: GSL3673 test_i2c error!
[    1.731979] gsl3673 4-0040: gsl_probe: init_chip failed
[    1.745385] gsl3673: probe of 4-0040 failed with error -1
[    1.745835] ___vtl_ts_probe() end____ 
[    1.745858] --->>> vtl_ts : xy_swap 1, x_reverse 0, y_reverse 0, x_mul 2, y_mul 2, bin_ver 0
[    1.745864] the screen_x is 1536 , screen_y is 2048 
[    1.745939] rk3x-i2c ff160000.i2c: Initialized RK3xxx I2C bus at e15d2000
[    1.747110] rk3x-i2c ff660000.i2c: Initialized RK3xxx I2C bus at e15d4000
[    1.749190] IR NEC protocol handler initialized
[    1.749236] IR RC5(x/sz) protocol handler initialized
[    1.749258] IR RC6 protocol handler initialized
[    1.749278] IR JVC protocol handler initialized
[    1.749297] IR Sony protocol handler initialized
[    1.749315] IR SANYO protocol handler initialized
[    1.749344] IR Sharp protocol handler initialized
[    1.749366] IR MCE Keyboard/mouse protocol handler initialized
[    1.749384] IR XMP protocol handler initialized
[    1.751377] usbcore: registered new interface driver uvcvideo
[    1.751408] USB Video Class driver (1.1.1)
[    1.751441] CamSys driver version: v0.48.3, CamSys head file version: v1.0.0
[    1.756435] test_power_init: could not find dev node
[    1.759659] Boot mode: normal
[    1.760854] rockchip-thermal ff280000.tsadc: Missing rockchip,grf property
[    1.760980] rk_tsadcv2_temp_to_code: Invalid conversion table: code=4095, temperature=2147483647
[    1.761276] rockchip-thermal ff280000.tsadc: tsadc is probed successfully!
[    1.762636] device-mapper: uevent: version 1.0.3
[    1.763165] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    1.763437] device-mapper: verity-avb: AVB error handler initialized with vbmeta device: 
[    1.763493] Bluetooth: HCI UART driver ver 2.3
[    1.763511] Bluetooth: HCI UART protocol H4 registered
[    1.763524] Bluetooth: HCI UART protocol LL registered
[    1.763547] rtk_btusb: RTKBT_RELEASE_NAME: 20180702_BT_ANDROID_8.1
[    1.763560] rtk_btusb: Realtek Bluetooth USB driver module init, version 4.1.5
[    1.763571] rtk_btusb: Register usb char device interface for BT driver
[    1.763977] usbcore: registered new interface driver rtk_btusb
[    1.764495] cpu cpu0: bin=1
[    1.764713] cpu cpu0: leakage=21
[    1.777473] cpu cpu0: temp=39090, pvtm=17008 (17080 + -72)
[    1.777560] rockchip_cpuclk_pre_rate_change: Invalid rate : 500000000 for cpuclk
[    1.777616] cpu cpu0: pvtm-volt-sel=3
[    1.777733] cpu cpu0: bin-scale=25
[    1.780431] cpu cpu0: avs=0
[    1.782253] cpu cpu0: failed to find power_model node
[    1.782659] Synopsys Designware Multimedia Card Interface Driver
[    1.784230] dwmmc_rockchip ff0c0000.dwmmc: IDMAC supports 32-bit address mode.
[    1.784354] dwmmc_rockchip ff0c0000.dwmmc: Using internal DMA controller.
[    1.784400] dwmmc_rockchip ff0c0000.dwmmc: Version ID is 270a
[    1.784492] dwmmc_rockchip ff0c0000.dwmmc: DW MMC controller at irq 29,32 bit host data width,256 deep fifo
[    1.784537] dwmmc_rockchip ff0c0000.dwmmc: 'clock-freq-min-max' property was deprecated.
[    1.786205] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
[    1.786406] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
[    1.798544] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    1.808622] ___chip_i2c_write:i2c write error___
[    1.811991] dwmmc_rockchip ff0c0000.dwmmc: 1 slots initialized
[    1.813972] dwmmc_rockchip ff0d0000.dwmmc: IDMAC supports 32-bit address mode.
[    1.814093] dwmmc_rockchip ff0d0000.dwmmc: Using internal DMA controller.
[    1.814138] dwmmc_rockchip ff0d0000.dwmmc: Version ID is 270a
[    1.814220] dwmmc_rockchip ff0d0000.dwmmc: DW MMC controller at irq 30,32 bit host data width,256 deep fifo
[    1.814269] dwmmc_rockchip ff0d0000.dwmmc: 'clock-freq-min-max' property was deprecated.
[    1.814343] dwmmc_rockchip ff0d0000.dwmmc: No vmmc regulator found
[    1.814363] dwmmc_rockchip ff0d0000.dwmmc: No vqmmc regulator found
[    1.814865] dwmmc_rockchip ff0d0000.dwmmc: allocated mmc-pwrseq
[    1.828609] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    1.841936] dwmmc_rockchip ff0d0000.dwmmc: 1 slots initialized
[    1.842877] dwmmc_rockchip ff0f0000.dwmmc: IDMAC supports 32-bit address mode.
[    1.842986] dwmmc_rockchip ff0f0000.dwmmc: Using internal DMA controller.
[    1.843031] dwmmc_rockchip ff0f0000.dwmmc: Version ID is 270a
[    1.843111] dwmmc_rockchip ff0f0000.dwmmc: DW MMC controller at irq 31,32 bit host data width,256 deep fifo
[    1.843152] dwmmc_rockchip ff0f0000.dwmmc: 'clock-freq-min-max' property was deprecated.
[    1.843232] dwmmc_rockchip ff0f0000.dwmmc: No vmmc regulator found
[    1.843253] dwmmc_rockchip ff0f0000.dwmmc: No vqmmc regulator found
[    1.855355] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    1.868569] usb 2-1: new high-speed USB device number 2 using ehci-platform
[    1.868918] dwmmc_rockchip ff0f0000.dwmmc: 1 slots initialized
[    1.870467] hidraw: raw HID events driver (C) Jiri Kosina
[    1.874144] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    1.875798] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.877095] usbcore: registered new interface driver usbhid
[    1.877129] usbhid: USB HID core driver
[    1.877464] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.877803] inv-mpu-iio 1-0068: int_config=0,level_shifter=0,client.addr=68,client.irq=149
[    1.877839] inv-mpu-iio 1-0068: 0 
[    1.877859] inv-mpu-iio 1-0068: 1 
[    1.877886] inv-mpu-iio 1-0068: 0 
[    1.877904] inv-mpu-iio 1-0068: -1 
[    1.877921] inv-mpu-iio 1-0068: 0 
[    1.877938] inv-mpu-iio 1-0068: 0 
[    1.877955] inv-mpu-iio 1-0068: 0 
[    1.877971] inv-mpu-iio 1-0068: 0 
[    1.877988] inv-mpu-iio 1-0068: 1 
[    1.878005] inv-mpu-iio 1-0068: 
[    1.878018] inv_mpu_iio: secondary_i2c_addr=0
[    1.878123] inv_mpu_iio: inv_mpu: reset chip failed, err = -6
[    1.880407] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    1.883942] mmc1: queuing unknown CIS tuple 0x81 (9 bytes)
[    1.908547] usb 1-1: new high-speed USB device number 2 using dwc2
[    1.931597] mmc_host mmc2: Bus speed (slot 0) = 99000000Hz (slot req 100000000Hz, actual 99000000HZ div = 0)
[    1.978596] inv_mpu_iio: inv_mpu: reset chip failed, err = -6
[    1.984898] mmc_host mmc1: Bus speed (slot 0) = 49500000Hz (slot req 50000000Hz, actual 49500000HZ div = 0)
[    1.986982] mmc1: new high speed SDIO card at address 0001
[    1.992501] usb 2-1: New USB device found, idVendor=1a40, idProduct=0101
[    1.992545] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.992567] usb 2-1: Product: USB 2.0 Hub
[    1.993560] hub 2-1:1.0: USB hub found
[    1.993753] hub 2-1:1.0: 4 ports detected
[    2.011939] ___chip_i2c_write:i2c write error___
[    2.016977] ___chip ID = 255___cnt = 0
[    2.017089] ___chip_i2c_write:i2c write error___
[    2.022121] ___chip ID = 255___cnt = 1
[    2.022226] ___chip_i2c_write:i2c write error___
[    2.027258] ___chip ID = 255___cnt = 2
[    2.027293] vtl_ts 4-0001: vtl ts chip init failed.
[    2.027321] vtl_ts_Kthread exit,vtl_ts_handler(642)
[    2.081931] inv_mpu_iio: inv_mpu: reset chip failed, err = -6
[    2.082763] usb 1-1: New USB device found, idVendor=152d, idProduct=2329
[    2.082807] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[    2.082829] usb 1-1: Product: USB to ATA/ATAPI bridge
[    2.082849] usb 1-1: Manufacturer: JMicron
[    2.082868] usb 1-1: SerialNumber: 801130168383
[    2.084226] usb-storage 1-1:1.0: USB Mass Storage device detected
[    2.084686] usb-storage 1-1:1.0: Quirks match for vid 152d pid 2329: 8020
[    2.084858] scsi host0: usb-storage 1-1:1.0
[    2.118597] dwmmc_rockchip ff0f0000.dwmmc: Successfully tuned phase to 170
[    2.118762] mmc2: new HS200 MMC card at address 0001
[    2.119645] mmcblk2: mmc2:0001 8GTF4R 7.28 GiB 
[    2.120086] mmcblk2boot0: mmc2:0001 8GTF4R partition 1 4.00 MiB
[    2.120523] mmcblk2boot1: mmc2:0001 8GTF4R partition 2 4.00 MiB
[    2.120943] mmcblk2rpmb: mmc2:0001 8GTF4R partition 3 512 KiB
[    2.124833]  mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19
[    2.185311] inv_mpu_iio: inv_mpu: reset chip failed, err = -6
[    2.288877] inv_mpu_iio: inv_mpu: reset chip failed, err = -6
[    2.392208] inv_mpu_iio: inv_mpu: reset chip failed, err = -6
[    2.495529] inv_mpu_iio: inv_mpu: reset chip failed, err = -6
[    2.598870] inv_mpu_iio: inv_mpu: reset chip failed, err = -6
[    2.702253] inv_mpu_iio: inv_mpu: reset chip failed, err = -6
[    2.805540] inv_mpu_iio: inv_mpu: reset chip failed, err = -6
[    3.012260] i2c i2c-1: inv_mpu_probe failed -6
[    3.012463] inv-mpu-iio: probe of 1-0068 failed with error -5
[    3.012853] inv_mpu_iio: inv_mpu_init:746
[    3.017271] ashmem: initialized
[    3.025754] rockchip-dmc dmc: unable to get devfreq-event device : dfi
[    3.040560] rknandbase v1.2 2018-05-08
[    3.041610] rknand ff400000.nandc: rknand_probe clk rate = 148500000
[    3.042115] ftl_init fffffffe
[    3.042172] rk_ftl_init fail
[    3.043420] usbcore: registered new interface driver snd-usb-audio
[    3.057524] u32 classifier
[    3.057558]     Actions configured
[    3.057675] Netfilter messages via NETLINK v0.30.
[    3.057791] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    3.058743] ctnetlink v0.93: registering with nfnetlink.
[    3.059908] xt_time: kernel timezone is -0000
[    3.060263] IPv4 over IPsec tunneling driver
[    3.061906] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.062452] arp_tables: (C) 2002 David S. Miller
[    3.062734] Initializing XFRM netlink socket
[    3.063837] NET: Registered protocol family 10
[    3.065778] mip6: Mobile IPv6
[    3.065861] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    3.067887] sit: IPv6 over IPv4 tunneling driver
[    3.069997] NET: Registered protocol family 17
[    3.070081] NET: Registered protocol family 15
[    3.070177] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    3.070598] Bridge firewalling registered
[    3.070647] Ebtables v2.0 registered
[    3.070921] Bluetooth: RFCOMM TTY layer initialized
[    3.070977] Bluetooth: RFCOMM socket layer initialized
[    3.071021] Bluetooth: RFCOMM ver 1.11
[    3.071081] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    3.071098] Bluetooth: BNEP filters: protocol multicast
[    3.071123] Bluetooth: BNEP socket layer initialized
[    3.071152] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    3.071174] Bluetooth: HIDP socket layer initialized
[    3.071237] l2tp_core: L2TP core driver, V2.0
[    3.071289] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[    3.071322] [WLAN_RFKILL]: Enter rfkill_wlan_init
[    3.071713] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[    3.071779] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6335
[    3.071882] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[    3.071914] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[    3.072057] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 150, flags = 0.
[    3.072081] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !
[    3.072093] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[    3.072106] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[    3.072213] [BT_RFKILL]: Enter rfkill_rk_init
[    3.072686] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 139.
[    3.072760] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 149.
[    3.072810] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 146.
[    3.072852] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 151.
[    3.072866] [BT_RFKILL]: bluetooth_platdata_parse_dt: clk_get failed!!!.
[    3.072941] [BT_RFKILL]: Request irq for bt wakeup host
[    3.073013] [BT_RFKILL]: ** disable irq
[    3.073191] [BT_RFKILL]: bt_default device registered.
[    3.073428] sensor_register_slave:mpu6880_gyro,id=50
[    3.074174] Error: Driver 'gc0329' is already registered, aborting...
[    3.074325] Error: Driver 'gc2145' is already reStgarting reicovery (pid 191) on Sat Jan  1 00:02:24 2000
steI:[libfs_mgr]fs_mgr_read_fstab_dt(): failed teo read fstab from dt
recovery filesystem table
=========================
#   0 /mnt/internal_sd vfat /dev/block/platform/1021c000.dwmmc/by-name/user 0
  1 /mnt/external_sd vfat /dev/block/mmcbldk0p1, 0
  2 /  exta4 /dev/block/by-name/system 0
  3 /vendor ext4 /dev/block/by-name/vendor 0
  4 /oem ext4 /dev/block/by-name/oem 0
  5 /cachbe exot4 /rdev/block/by-name/cache 0
  6 /metadata ext4 /dev/block/by-name/metadata 0
  7 /data f2fs /dev/block/by-name/userdata 0
  8 /cust ext4 /dev/blotck/biy-name/cunst 0
  9 /custom ext4 /dev/block/by-name/custom 0
  10 /radical_update ext4 /dev/block/by-name/radical_update 0
sc 0 /misc emmc g/dev./block/by.-nam.e/mi
  12 /uboot emmc /dev/block/by-name/uboot 0
  13 /charge emmc /dev/block/by-name/charge 0
  14 /resource emmc /dev/block/by-name/resource 
                                                0
  15 /param[eter emmc /dev/block/by-name/parameter 0
  16 /boot emmc /dev/block/by-name/boot 0
   17  /rec over3y emmc /dev/block/by-name/recovery 0
  18 /backup emmc /dev/block/by-name/backup 0
  19 /frp e.mmc 0/dev7/block/by6-nam7e/frp 0
  20 /trust emmc /dev/block/by-name/trust 0
  21 /baseparamer emmc /dev/block/by-name/basep0aram4er 0]
  22 /vbmeta emmc /dev/block/by-name/vbmeta 0
  23 /tmp ramdisk ramdisk 0

exit=================
res ult_point[2] is ---R-/dev/block/mmcblk1
result_point[0] is ----/dev/block/mmcblk2
111
emmc_point is /dev/block/mmcblk2
sd_epoingt is (null)
sd_point_2 is (null)
read cmdline
istI:[libfs_mgr]fs_mgr_read_fstab_dt(): failed to read fstab from dt
ering SWP/SWPB emulation handler
[    3.077614] registered taskstats version 1
[    3.079277] Key type encrypted registered
[    3.080468] rockchip ion idev is NULL
[    3.080518] rga2 ff920000.rga: rga ion client create success!
[    3.080898] rga2: Driver loaded successfully ver:3.00
[    3.081232] rga2: Module initialized.
[    3.082443] mali ffa30000.gpu: bin=0
[    3.082496] mali ffa30000.gpu: Failed to get leakage
[    3.082712] mali ffa30000.gpu: Failed to get pvtm
[    3.082757] mali ffa30000.gpu: bin-scale=59
[    3.083212] mali ffa30000.gpu: avs=0
[    3.083297] W : [File] : drivers/gpu/arm/midgard/platform/rk/mali_kbase_config_rk.c; [Line] : 114; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available.
[    3.083644] mali ffa30000.gpu: GPU identified as 0x0750 r1p0 status 0
[    3.083874] mali ffa30000.gpu: Protected mode not available
[    3.084650] mali ffa30000.gpu: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model
[    3.084987] I : [File] : drivers/gpu/arm/midgard/backend/gpu/mali_kbase_devfreq.c; [Line] : 423; [Func] : kbase_devfreq_init(); success initing power_model_simple.
[    3.086028] mali ffa30000.gpu: Probed as mali0
[    3.090745] rockchip-dmc dmc: Failed to get leakage
[    3.091091] rockchip-dmc dmc: Failed to get pvtm
[    3.091628] rockchip-dmc dmc: avs=0
[    3.091683] rockchip-dmc dmc: failed to get vop bandwidth to dmc rate
[    3.091700] rockchip-dmc dmc: failed to get vop pn to msch rl
[    3.091935] failed to get system status kobj
[    3.091963] rockchip-dmc dmc: could not find power_model node
[    3.092240] vendor storage:20190527 ret = 0
[    3.096401] rtc-hym8563 0-0051: setting system clock to 2000-01-01 00:02:23 UTC (946684943)
[    3.098666] scsi 0:0:0:0: Direct-Access                                    PQ: 0 ANSI: 2 CCS
[    3.100137] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.102704] devfreq ffa30000.gpu: Couldn't update frequency transition information.
[    3.115325] vcc_3g: disabling
[    3.115356] vcc_sd: disabling
[    3.115368] vcc_lcd: disabling
[    3.115379] vcc_wl: disabling
[    3.115676] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 417; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '11:56:25', on 'May 12 2022'.
[    3.116239] Mali: Mali device driver loaded
[    3.116936] input: rk29-keypad as /devices/platform/rockchip-key/input/input1
[    3.117828] ALSA device list:
[    3.117851]   No soundcards found.
[    3.166754] sd 0:0:0:0: [sda] Read Capacity(10) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    3.166790] sd 0:0:0:0: [sda] Sense Key : Unit Attention [current] 
[    3.166817] sd 0:0:0:0: [sda] Add. Sense: Not ready to ready change, medium may have changed
[    3.183634] sd 0:0:0:0: [sda] Test WP failed, assume Write Enabled
[    3.200539] sd 0:0:0:0: [sda] Asking for cache data failed
[    3.200566] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    3.286067] sd 0:0:0:0: [sda] Read Capacity(10) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    3.286216] sd 0:0:0:0: [sda] Sense Key : Unit Attention [current] 
[    3.286311] sd 0:0:0:0: [sda] Add. Sense: Not ready to ready change, medium may have changed
[    3.320403] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.328881] Freeing unused kernel memory: 1024K
[    3.354456] init: init first stage started!
[    3.354575] init: First stage mount skipped (recovery mode)
[    3.354941] init: Using Android DT directory /proc/device-tree/firmware/android/
[    3.355194] init: Skipped setting INIT_AVB_VERSION (not vbmeta compatible)
[    3.355571] init: Loading SELinux policy
[    3.476179] audit: type=1403 audit(946684943.876:2): policy loaded auid=4294967295 ses=4294967295
[    3.476341] selinux: SELinux: Loaded policy from /sepolicy
[    3.476341] 
[    3.479415] selinux: SELinux: Loaded file_contexts
[    3.479415] 
[    3.480463] random: init: uninitialized urandom read (40 bytes read, 37 bits of entropy available)
[    3.482688] init: init second stage started!
[    3.500531] init: Using Android DT directory /proc/device-tree/firmware/android/
[    3.504147] selinux: SELinux: Loaded file_contexts
[    3.504147] 
[    3.504178] init: Running restorecon...
[    3.507324] selinux: SELinux:  Could not stat /dev/block: No such file or directory.
[    3.507324] 
[    3.507767] init: waitid failed: No child processes
[    3.507838] init: Couldn't load property file '/system/etc/prop.default': open() failed: No such file or directory: No such file or directory
[    3.510378] init: Unable to set property 'ro.product.first_api_level' to '28' in property file '/prop.default': Read-only property was already set
[    3.510701] init: Unable to set property 'ro.board.platform' to 'rk3288' in property file '/prop.default': Read-only property was already set
[    3.511724] init: Unable to set property 'ro.adb.secure' to '0' in property file '/prop.default': Read-only property was already set
[    3.512591] init: Unable to set property 'ro.target.product' to 'tablet' in property file '/prop.default': Read-only property was already set
[    3.512718] init: Couldn't load property file '/product/build.prop': open() failed: No such file or directory: No such file or directory
[    3.512757] init: Couldn't load property file '/odm/default.prop': open() failed: No such file or directory: No such file or directory
[    3.512789] init: Couldn't load property file '/vendor/default.prop': open() failed: No such file or directory: No such file or directory
[    3.513203] init: Created socket '/dev/socket/property_service', mode 666, user 0, group 0
[    3.513752] init: Forked subcontext for 'u:r:vendor_init:s0' with pid 182
[    3.514170] init: Forked subcontext for 'u:r:vendor_init:s0' with pid 183
[    3.514289] init: Parsing file /init.rc...
[    3.514419] init: Added '/init.recovery.rk30board.rc' to import list
[    3.514457] init: Added '/init.rk30board.usb.rc' to import list
[    3.514481] init: Added '/init.usb.configfs.rc' to import list
[    3.514794] random: init: uninitialized urandom read (40 bytes read, 37 bits of entropy available)
[    3.514970] random: init: uninitialized urandom read (40 bytes read, 37 bits of entropy available)
[    3.515029] init: Parsing file /init.recovery.rk30board.rc...
[    3.515101] init: Unable to read config file '/init.recovery.rk30board.rc': open() failed: No such file or directory
[    3.515185] init: /init.rc: 1: Could not import file '/init.recovery.rk30board.rc': No such file or directory
[    3.515217] init: Parsing file /init.rk30board.usb.rc...
[    3.515843] init: Parsing file /init.usb.configfs.rc...
[    3.516685] init: Parsing file /system/etc/init...
[    3.516733] init: Unable to read config file '/system/etc/init': open() failed: No such file or directory
[    3.516766] init: Parsing file /product/etc/init...
[    3.516805] init: Unable to read config file '/product/etc/init': open() failed: No such file or directory
[    3.516830] init: Parsing file /odm/etc/init...
[    3.516858] init: Unable to read config file '/odm/etc/init': open() failed: No such file or directory
[    3.516883] init: Parsing file /vendor/etc/init...
[    3.516912] init: Unable to read config file '/vendor/etc/init': open() failed: No such file or directory
[    3.517006] init: processing action (early-init) from (/init.rc:5)
[    3.517124] init: starting service 'ueventd'...
[    3.517718] audit: type=1400 audit(946684943.916:3): avc:  denied  { write } for  pid=1 comm="init" path="/acct/uid_0/pid_184/cgroup.procs" dev="rootfs" ino=11715 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
[    3.518017] init: processing action (wait_for_coldboot_done) from (<Builtin Action>:0)
[    3.518763] random: ueventd: uninitialized urandom read (40 bytes read, 37 bits of entropy available)
[    3.520869] ueventd: ueventd started!
[    3.523144] selinux: SELinux: Loaded file_contexts
[    3.523144] 
[    3.523200] ueventd: Parsing file /ueventd.rc...
[    3.523897] ueventd: Parsing file /vendor/ueventd.rc...
[    3.523950] ueventd: Unable to read config file '/vendor/ueventd.rc': open() failed: No such file or directory
[    3.523989] ueventd: Parsing file /odm/ueventd.rc...
[    3.524032] ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory
[    3.524124] ueventd: Parsing file /ueventd.rk30board.rc...
[    3.524172] ueventd: Unable to read config file '/ueventd.rk30board.rc': open() failed: No such file or directory
[    3.524637] ueventd: [libfs_mgr]fs_mgr_read_fstab_dt(): failed to read fstab from dt
[    3.662514] ueventd: Coldboot took 0.137 seconds
[    3.669277] init: wait for '/dev/.coldboot_done' took 151ms
[    3.669409] init: Command 'wait_for_coldboot_done' action=wait_for_coldboot_done (<Builtin Action>:0) took 151ms and succeeded
[    3.669463] init: processing action (MixHwrngIntoLinuxRng) from (<Builtin Action>:0)
[    3.669503] init: /dev/hw_random not found
[    3.669530] init: processing action (SetMmapRndBits) from (<Builtin Action>:0)
[    3.669759] init: processing action (SetKptrRestrict) from (<Builtin Action>:0)
[    3.670010] init: processing action (keychord_init) from (<Builtin Action>:0)
[    3.670046] init: processing action (console_init) from (<Builtin Action>:0)
[    3.670092] init: processing action (init) from (/init.rc:11)
[    3.672650] init: processing action (StartBoringSslSelfTest) from (<Builtin Action>:0)
[    3.673151] init: processing action (MixHwrngIntoLinuxRng) from (<Builtin Action>:0)
[    3.673215] init: /dev/hw_random not found
[    3.673258] init: processing action (late-init) from (/init.rc:58)
[    3.673328] init: processing action (queue_property_triggers) from (<Builtin Action>:0)
[    3.673374] init: processing action (load_system_props_action) from (/init.rc:51)
[    3.673433] init: Couldn't load property file '/system/build.prop': open() failed: No such file or directory: No such file or directory
[    3.673466] init: Couldn't load property file '/odm/build.prop': open() failed: No such file or directory: No such file or directory
[    3.673497] init: Couldn't load property file '/vendor/build.prop': open() failed: No such file or directory: No such file or directory
[    3.673527] init: Couldn't load property file '/factory/factory.prop': open() failed: No such file or directory: No such file or directory
[    3.673976] init: [libfs_mgr]fs_mgr_read_fstab_dt(): failed to read fstab from dt
[    3.674038] init: error opening block device /dev/block/by-name/recovery: No such file or directory
[    3.674105] init: processing action (firmware_mounts_complete) from (/init.rc:54)
[    3.674172] init: processing action (persist.sys.usb.config=* && boot) from (/init.rc:36)
[    3.674549] init: processing action (boot) from (/init.rc:43)
[    3.675313] init: starting service 'charger'...
[    3.676083] init: starting service 'recovery'...
[    3.676811] init: processing action (boot) from (/init.rk30board.usb.rc:1)
[    3.677038] random: charger: uninitialized urandom read (40 bytes read, 37 bits of entropy available)
[    3.677915] random: recovery: uninitialized urandom read (40 bytes read, 37 bits of entropy available)
[    3.678310] healthd: No battery devices found
[    3.679843] healthd: battery none chg=
[    3.680913] file system registered
[    3.685101] using random self ethernet address
[    3.685144] using random host ethernet address
[    3.685546] init: Command 'write /config/usb_gadget/g1/functions/rndis.gs4/wceis 1' action=boot (/init.rk30board.usb.rc:19) took 0ms and failed: Unable to write to file '/config/usb_gadget/g1/functions/rndis.gs4/wceis': open() failed: Permission denied
[    3.690933] init: processing action (enable_property_trigger) from (<Builtin Action>:0)
[    3.691055] init: processing action (ro.debuggable=1) from (/init.rc:92)
[    3.691089] init: starting service 'adbd'...
[    3.691888] audit: type=1400 audit(946684944.093:4): avc:  granted  { read } for  pid=1 comm="init" name="ttyFIQ0" dev="tmpfs" ino=7460 scontext=u:r:init:s0 tcontext=u:object_r:serial_device:s0 tclass=chr_file
[    3.691923] audit: type=1400 audit(946684944.093:5): avc:  granted  { read open } for  pid=1 comm="init" path="/dev/ttyFIQ0" dev="tmpfs" ino=7460 scontext=u:r:init:s0 tcontext=u:object_r:serial_device:s0 tclass=chr_file
[    3.691994] init: starting service 'console'...
[    3.692651] init: Created socket '/dev/socket/adbd', mode 660, user 1000, group 1000
[    3.692673] init: processing action (sys.usb.config=mtp,adb && sys.usb.configfs=1) from (/init.rk30board.usb.rc:86)
[    3.693227] init: processing action (sys.usb.config=mtp,adb && sys.usb.configfs=1) from (/init.usb.configfs.rc:32)
[    3.693297] init: processing action (sys.usb.config=mtp,adb && sys.usb.configfs=1 && sys.usb.ffs.ready=1) from (/init.usb.configfs.rc:35)
[    3.693832] configfs-gadget gadget: unbind function 'mtp'/cfa9a000
[    3.693859] configfs-gadget ff580000.usb: failed to start g1: -19
[    3.693974] init: Command 'write /config/usb_gadget/g1/UDC ${sys.usb.controller}' action=sys.usb.config=mtp,adb && sys.usb.configfs=1 && sys.usb.ffs.ready=1 (/init.usb.configfs.rc:39) took 0ms and failed: Unable to write to file '/config/usb_gadget/g1/UDC': Unable to write file contents: No such device
[    3.694182] random: adbd: uninitialized urandom read (40 bytes read, 37 bits of entropy available)
[    3.694684] audit: type=1400 audit(946684944.093:6): avc:  granted  { read } for  pid=194 comm="init" name="ttyFIQ0" dev="tmpfs" ino=7460 scontext=u:r:init:s0 tcontext=u:object_r:serial_device:s0 tclass=chr_file
[    3.694719] audit: type=1400 audit(946684944.093:7): avc:  granted  { read open } for  pid=194 comm="init" path="/dev/ttyFIQ0" dev="tmpfs" ino=7460 scontext=u:r:init:s0 tcontext=u:object_r:serial_device:s0 tclass=chr_file
[    3.694795] init: setpgid failed for console: Operation not permitted
[    3.695383] audit: type=1400 audit(946684944.096:8): avc:  denied  { execute } for  pid=194 comm="sh" path="/sbin/sh" dev="rootfs" ino=8279 scontext=u:r:shell:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
[    3.696672] init: Untracked pid 189 exited with status 0
[    3.696748] read descriptors
[    3.696765] read strings
[    3.697269] init: processing action (sys.usb.config=mtp,adb && sys.usb.configfs=1 && sys.usb.ffs.ready=1) from (/init.usb.configfs.rc:35)
[    3.697786] pcd_pullup, is_on 1
[    5.262051] iep dpi mode inactivity
[    9.648681] [otg id chg] last id -1 current id 1
[    9.648850] PortPower off
[    9.648926] rk_battery_charger_detect_cb , battery_charger_detect 6
[    9.750062] Using Buffer DMA mode
[    9.750073] Periodic Transfer Interrupt Enhancement - disabled
[    9.750078] Multiprocessor Interrupt Enhancement - disabled
[    9.750084] OTG VER PARAM: 0, OTG VER FLAG: 0
[    9.750088] ^^^^^^^^^^^^^^^^^Device Mode
[    9.750100] dwc_otg_hcd_resume, usb device mode
[    9.852170] dwc_otg_hcd_suspend, usb device mode
[   10.248663] ***************vbus detect*****************
[   10.649156] rk_battery_charger_detect_cb , battery_charger_detect 2
[   10.777214] Using Buffer DMA mode
[   10.777225] Periodic Transfer Interrupt Enhancement - disabled
[   10.777229] Multiprocessor Interrupt Enhancement - disabled
[   10.777234] OTG VER PARAM: 0, OTG VER FLAG: 0
[   10.777238] ^^^^^^^^^^^^^^^^^Device Mode
[   10.781284] *******************soft connect!!!*******************
[   11.652007] **************soft reconnect**************
[   11.781005] Using Buffer DMA mode
[   11.781016] Periodic Transfer Interrupt Enhancement - disabled
[   11.781021] Multiprocessor Interrupt Enhancement - disabled
[   11.781027] OTG VER PARAM: 0, OTG VER FLAG: 0
[   11.781031] ^^^^^^^^^^^^^^^^^Device Mode
[   11.785079] *******************soft connect!!!*******************
[   12.655344] **************soft reconnect**************
[   12.784333] Using Buffer DMA mode
[   12.784343] Periodic Transfer Interrupt Enhancement - disabled
[   12.784348] Multiprocessor Interrupt Enhancement - disabled
[   12.784354] OTG VER PARAM: 0, OTG VER FLAG: 0
[   12.784359] ^^^^^^^^^^^^^^^^^Device Mode
[   12.788404] *******************soft connect!!!*******************
[   13.658675] **************soft reconnect**************
[   13.787671] Using Buffer DMA mode
[   13.787681] Periodic Transfer Interrupt Enhancement - disabled
[   13.787686] Multiprocessor Interrupt Enhancement - disabled
[   13.787692] OTG VER PARAM: 0, OTG VER FLAG: 0
[   13.787696] ^^^^^^^^^^^^^^^^^Device Mode
[   13.791743] *******************soft connect!!!*******************
E:failed to stat /dev/block/by-name/misc try 1: No such file or directory
E:failed to stat /dev/block/by-name/misc try 2: No such file or directory
E:failed to stat /dev/block/by-name/misc try 3: No such file or directory
E:failed to stat /dev/block/by-name/misc try 4: No such file or directory
E:failed to stat /dev/block/by-name/misc try 5: No such file or directory
E:failed to stat /dev/block/by-name/misc try 6: No such file or directory
E:failed to stat /dev/block/by-name/misc try 7: No such file or directory
E:failed to stat /dev/block/by-name/misc try 8: No such file or directory
E:failed to stat /dev/block/by-name/misc try 9: No such file or directory
E:failed to stat /dev/block/by-name/misc try 10: No such file or directory
E:failed to stat /dev/block/by-name/misc
E:
E:Failed to mount /cache: No such file or directory
I:[libfs_mgr]fs_mgr_read_fstab_dt(): failed to read fstab from dt
[   14.662011] **************soft reconnect**************
[   14.791011] Using Buffer DMA mode
[   14.791022] Periodic Transfer Interrupt Enhancement - disabled
[   14.791027] Multiprocessor Interrupt Enhancement - disabled
[   14.791032] OTG VER PARAM: 0, OTG VER FLAG: 0
[   14.791037] ^^^^^^^^^^^^^^^^^Device Mode
[   14.795085] *******************soft connect!!!*******************
[   15.665344] **************soft reconnect**************
[   15.794338] Using Buffer DMA mode
[   15.794348] Periodic Transfer Interrupt Enhancement - disabled
[   15.794353] Multiprocessor Interrupt Enhancement - disabled
[   15.794359] OTG VER PARAM: 0, OTG VER FLAG: 0
[   15.794363] ^^^^^^^^^^^^^^^^^Device Mode
[   15.798409] *******************soft connect!!!*******************
E:Failed to set BCB message: failed to stat /dev/block/by-name/misc try 1: No such file or directory
E:failed to stat /dev/block/by-name/misc try 2: No such file or directory
E:failed to stat /dev/block/by-name/misc try 3: No such file or directory
E:failed to stat /dev/block/by-name/misc try 4: No such file or directory
E:failed to stat /dev/block/by-name/misc try 5: No such file or directory
E:failed to stat /dev/block/by-name/misc try 6: No such file or directory
E:failed to stat /dev/block/by-name/misc try 7: No such file or directory
E:failed to stat /dev/block/by-name/misc try 8: No such file or directory
E:failed to stat /dev/block/by-name/misc try 9: No such file or directory
E:failed to stat /dev/block/by-name/misc try 10: No such file or directory
E:failed to stat /dev/block/by-name/misc
E:
E:Failed to mount /cache: No such file or directory
E:Can't mount /cache/recovery/last_locale
locale is [en-US]
stage is []
reason is [(null)]
W:Failed to read max brightness: No such file or directory
I:Screensaver disabled
cannot find/open a drm device: No such file or directory
fb0 reports (possibly inaccurate):
  vi.bits_per_pixel = 32
  vi.red.offset   =  16   .length =   8
  vi.green.offset =   8   .length =   8
  vi.blue.offset  =   0   .length =   8
  fi.line_length = 4096
framebuffer: 0 (1024 x 768)
          erasing_text: en (91 x 38 @ 1365)
       no_command_text: en (166 x 38 @ 1365)
            error_text: en (66 x 38 @ 1365)
       installing_text: en (304 x 38 @ 1596)
SELinux: Loaded file_contexts
E:Failed to mount /metadata: No such file or directory
mount metadata fail,so formate...
ensure_path_unmounted path is /metadata
Volume is already unmounted
[   25.047462] random: mke2fs_static: uninitialized urandom read mke2fs 1.43.3 (04-Sep-2016)
The file /dev/block/by-name/me(tada4ta does not exist and no size was specified.
0E:/sbin/mke2fs_static failed with  statbs 1
ytes read, 61 bits of entropy available)
E:format_volume: Failed to make ext4 on /dev/block/by-name/metadata: No such file or directory
E:Failed to mount /metadata: No such file or directory
Command: "/sbin/recovery"


persist.bluetooth.rtkcoex=true
persist.bluetooth.btsnooppath=/sdcard/btsnoop_hci.cfa
persist.bluetooth.btsnoopsize=0xffff
persist.bluetooth.btsnoopenable=false
bluetooth.enable_timeout_ms=11000
ro.boottime.adbd=3559614986
ro.boottime.init=3220
ro.boottime.init.selinux=121
ro.boottime.init.cold_boot_wait=151
ro.boottime.charger=3543841359
ro.boottime.console=3560491152
ro.boottime.ueventd=3385643968
ro.boottime.recovery=3544588026
dalvik.vm.dex2oat-minidebuginfo=true
pm.dexopt.shared=speed
ro.rk.displayd.enable=false
ro.rk.bt_enable=true
ro.rk.systembar.tabletUI=false
ro.rk.systembar.voiceicon=true
ro.rk.MassStorage=false
ro.rk.hdmi_enable=true
ro.rk.flash_enable=true
ro.rk.homepage_base=http://www.google.com/webhp?client={CID}&amp;source=android-home
ro.rk.def_brightness=200
ro.rk.screenoff_time=60000
ro.rk.screenshot_enable=true
ro.rk.LowBatteryBrightness=false
ro.rk.install_non_market_apps=false
ro.tee.storage=rkss
ro.boot.noril=true
ro.rksdk.version=RK30_ANDROID9-SDK-v1.00.00
ro.config.enable.remotecontrol=false
ro.ker[nel. android.c heck jni=0
ro.target.product=tablet
ro.tether.denied=false
ro.factory.tool=0
ro.factory.hasGPS=fa2lse
ro.f5actory.wi.thout_battery=false
ro.factory.storage_suppntfs=true
ro.safemode.disabled=true
sf.power.contr0ol=280736200
4ril.function.dataonly=1
sys.status.hidebar_enable=false
sys.resolution.changed=false
debug.nfc.se=4fals3e
d]ebug .nfc.fw_download=false
debug.atrace.tags.enableflags=0
persist.sys.usb.config=mtp,adab
puersidst.sys.stirictmode.visual=false
ro.sf.hwrotation=0
ro.sf.fakerotation=false
ro.art.hiddenapi.warning=1
:o.boot.vtr=0
 ro.boot.flash.locked=0
ro.boot.selinux=permissive
ro.boot.dtbo_idx=0
ro.boot.storagemedia=emmc
r o.witfi.cyhannels=
ro.allow.mock.location=0
ro.build.flavor=rk3288-userdebug
eo.build.version.all_codenames=pREL
 ro.=buil1d.version.min_supported_target_sdk=17
ro.build.characteristics=tablet
ro.build.shutdown_timeout=0
ro.bionic.4ld.w0arni0ng=1
ro.treble.enabled=true
ro.default.size=100
ro.product.cpu.abi2=armeabi
ro.product.ota.host=www.ro ckchaip.com:2300
ro.product.locale=en-US
ro.product.version=1.0.0
ro.flash_img.enable=false
ro.actionable_cuompadtible_property.enabled=true
init.svc.adbd=running
init.svc.charger=running
init.svc.console=running
init.svic.uetvent(d=running
init.svc.recovery=running
rild.libargs=-d
rild.libpath=/system/lib/libril-rk29-dataonly.so
p9ersist.te4gra.nvmmlite=1
persist.enable_task_snapshots=false
6ro.config.ringtone=Ring_Synth_04.ogg
ro.config.alarm_ale6rt=A8larm_Classic.ogg
ro.config.notification_sound=pixiedust.ogg
ro.boot.mode=normal
ro.boot.4cons9le=ttyFIQ0
ro.boot.baseband=N/A
ro.boot.hardware=rk30board
6o.boot.veritymode=enforcing
 ro.boot.verif5iedb.ootstate=4orange
ro.build.id=PI
ro.build.date=Wed May 11 15:26:12 CST 2022
ro.build.date.utc=1652253972
ro.8buil3.hos:t=boardcon
ro.build.tags=test-keys
ro.build.type=userdebug
ro.build.user=liuyuan
ro.build.di9splay.id=)rk32:88-userdebug 9 PI 152718 test-keys
ro.build.product=rk3288
ro.build.version.sdk=28
ro.build.versioan.bavse_ocs=
:ro.build.version.release=9
ro.build.version.codename=REL
ro.build.version.incremental=152718
ro.build.version.preview_sdk=0
ro.build .ver sion.security_patch=2020-03-05
ro.build.description=rk3288-userdebug 9 PI 152718 test-keys
ro.buildd.sysetem_root_image=true
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abilist=armeabi-v7a,armeabi
ro.producnt.naime=rek328d8
ro.product.brand=rockchip
ro.product.model=rk3288
ro.product.device=rk3288
ro.product .manufacturer= rock{chip
ro.baseband=N/A
ro.bootmode=normal
ro.hardware=rk30board
ro.revision=0
ro.bootimage.build.d ate=oWed May 1p1 15:26:12 CST 2022
ro.bootimage.build.date.utc=1652253972
ro.bootimage.build.fingerprinte=rocnkchi p/rk3288/rk3288:9/PI/liuyuan05111526:userdebug/test-keys
ro.bootloader=unknown
ro.debuggable=1
ro.}prop rty_servifce.version=2
osys.rsb.s tate=mtp,adb
sys.usb.controller=ff580000.usb
persist.sys.dalvik.vm.lib.2=libart.so
persi st.spys.ziram_enabled=1
ro.sf.lcd_density=320
ro.com.android.dataroaming=true
ro.boot.wificountrycdode=US
r=o.zygote=1zygo9te32
ro.opengles.version=196610
ro.oem_unlock_supported=1
ro.enable_boot_charger_mode=0
drm.servi1ce.enabled=true
keyguard.no_require_sim=true
tombstoned.max_tombstone_count=50
ro.dalvik.vm.native .bricdge=o
damlvik.vm.i=sa.arm.variant=cortex-a15
dalvik.vm.isa.arm.features=default
ralvik.vm.dexopt.secondary=t"rue
 dalevik.vm.usejit=true
dalvik.vm.heapsize=512m
dalvik.vm.lockprof.threshold=500
dalvik.vm.dex2oatc-Xmso=64mv
daelvik.vm.dex2oat-Xmx=512m
dalvik.vm.heapmaxfree=8m
dalvik.vm.heapminfree=512k
dalvik.vm.heapstrartsyize=16m
dalvik.vm.appimageformat=lz4
dalvik.vm.usejitprofiles=true
dalvik.vm.heapgrowthl"imit =192m
daplvik.vm.stack-ttrace-dir=/data/anr
dalvik.vm.image-dex2oat-Xms=64m
dalvik.vm.image-dex2oat-Xmx=64m
dalvhik.v=m.he"aptargetutilization=0.75
ro.boot.slot_suffix=
ro.vndk.version=28
ro.board.platform=rk328/8
rdo.veendor.builvd.da/te=Wed May 11 15:26:12 CST 2022
ro.vendor.build.date.utc=1652253972
ro.vendor.build.finge_rpri_nt=rockchip/rk3288/rk3288:9/PI/liuyuan05111526:userdebug/test-keys
ro.carrier=unknown
ro.product.cpu.abiplist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=
ro.product.board=rk30sdk
ro.productr.vendor.noame=prk3288
reo.product.vendor.brand=rockchip
ro.product.vendor.model=rk3288
ro.product.vendor.devrice=rk3288
ro.prodtuct.vendor.manufacturer=rockchip
ro.product.usbfactory=rockchip_usb
ro.product.first_api_level=28
wifi.einterface=wlan0
ro.build.fingerprint=rockchip/rk3288/rk3288:9/PI/liuyuan05111526:userdebug/tests-key_s
p_m.dexopt.boot=verify
pm.dexopt.ab-ota=speed-profile
pm.dexopt.install=speed-profile
pm.dexopt.bg-dexopt/=speed-profile
pm.dexopt.first-boot=quicken
ro.adb.secure=0
ro.secure=1
sys.usb.config=mtp,adb
suys.usb.configfs=1
sys.usb.ffs.mtp.ready=1
sys.usb.ffs.ready=1
:olog.tag.stats_log=I
ro.logd.bsize.stats=64Kj
roe.logcd.kernel=1
t_r:bpm.dexopt.inactive=verify
ro.factory.hasUMS=false
vendor.hwc.compose_policy=6
ro.lril.uecclist=1e12,911
ro.boot.serialno=GC3F84X3V3
ro.serialno=rockchipplatform
security.perf_harden=1
tnet.bt.naome=Aondrotid
sys.rkadb.root=0
sys.wallpaper.rgb565=0
h_aro.audio.monitorOrientation=true
ro.vendor.udisk.visible2=trude
rpo.vendor.product.cpu.abilist=armeabi-v7a,armeabi
ro.vendor.product.cpu.abilist32=armeabi-v7a,armeabi_
roo.vendor.product.cpu.abilist64=
wifi.supplicant_scan_interval=15
testing.mediascanner.skiplist=f/mntf/shelll/emulated/Android/
oaro.vendor.build.security_patch=2020-03-05

Supported API: 3
d_prop:s0" dev="tmpfs" ino=11596 scontext=enter try_do_sdcard_boot 
us_boot_from_sd is_sd_boot=0 
 try_do_s:dcard_boot is rdone:,  irs_sdupdate=0 *stat=0 
ecovery:s0 tcontext=u:object_r:bluetooth_a2dp_offload_prop:s0 tclass=file permissive=1
[   25.082481] aI:Saving locale "en-US"
udE:Failed to mount /cacihe: No such file or directory
t: type=1400 audit(946684965.483:10): avc:  denied  { E:Failed to mount /cache/recovery/last_locale
getattr } for  pid=191 comm="recovery" path="/dev/__propertiI:[libfs_mgr]fs_mgr_read_fstab_dt(): failed to read fstab from dt
E:Failed to clear BCB message: failed to open /deve/blosck/by-nam_e/misc: No such file or directory
_/u:object_r:bluetooth_a2dp_offload_prop:s0" dev="tmpfs" ino=1li1bc: 5invalid p9thread_t (0) passed6 to  libcs
Jocin led thread error!
ontE:Failed to mount /ecachxe: No sucth file or directory
=u:r:recovery:s0 tcontext=u:object_r:bluetooth_a2dp_offload_propW:Ca:n't sunlink /cache/recov0ery/ commtand
clenasures_path_unmounted path is /cache
Volume is already unmounted
s=file permissive=1
[   25.082556] audit: type=1400 audit(946684965.483:11): avc:  denied  { open } for  pid=191 comm="recovery" path="/dev/__properties__/u:object_r:bluetooth_prop:s0" dev="tmpfs" ino=11597 scontext=u:r:recovery:s0 tcontext=u:object_r:bluetooth_prop:s0 tclass=file permissive=1
[   25.082579] audit: type=1400 audit(946684965.483:12): avc:  denied  { getattr } for  pid=191 comm="recovery" path="/dev/__properties__/u:object_r:bluetooth_prop:s0" dev="tmpfs" ino=11597 scontext=u:r:recovery:s0 tcontext=u:object_r:bluetooth_prop:s0 tclass=file permissive=1
[   25.098620] audit: type=1400 audit(946684965.500:13): avc:  denied  { open } for  pid=191 comm="recovery" path="/dev/__properties__/u:object_r:boottime_prop:s0" dev="tmpfs" ino=11599 scontext=u:r:recovery:s0 tcontext=u:object_r:boottime_prop:s0 tclass=file permissive=1
[   25.098649] audit: type=1400 audit(946684965.500:14): avc:  denied  { getattr } for  pid=191 comm="recovery" path="/dev/__properties__/u:object_r:boottime_prop:s0" dev="tmpfs" ino=11599 scontext=u:r:recovery:s0 tcontext=u:object_r:boottime_prop:s0 tclass=file permissive=1
[   25.120201] audit: type=1400 audit(946684965.520:15): avc:  denied  { open } for  pid=191 comm="recovery" path="/dev/__properties__/u:object_r:ctl_console_prop:s0" dev="tmpfs" ino=11604 scontext=u:r:recovery:s0 tcontext=u:object_r:ctl_console_prop:s0 tclass=file permissive=1
[   25.120230] audit: type=1400 audit(946684965.520:16): avc:  denied  { getattr } for  pid=191 comm="recovery" path="/dev/__properties__/u:object_r:ctl_console_prop:s0" dev="tmpfs" ino=11604 scontext=u:r:recovery:s0 tcontext=u:object_r:ctl_console_prop:s0 tclass=file permissive=1
[   25.120322] audit: type=1400 audit(946684965.520:17): avc:  denied  { open } for  pid=191 comm="recovery" path="/dev/__properties__/u:object_r:ctl_dumpstate_prop:s0" dev="tmpfs" ino=11606 scontext=u:r:recovery:s0 tcontext=u:object_r:ctl_dumpstate_prop:s0 tclass=file permissive=1
[   25.120349] audit: type=1400 audit(946684965.520:18): avc:  denied  { getattr } for  pid=191 comm="recovery" path="/dev/__properties__/u:object_r:ctl_dumpstate_prop:s0" dev="tmpfs" ino=11606 scontext=u:r:recovery:s0 tcontext=u:object_r:ctl_dumpstate_prop:s0 tclass=file permissive=1

# 
# 
# 
# 
# 
# 
# 

2.解决办法:

\kernel\arch\arm\boot\dts\rk3288-evb-android-act8846-lvds.dts


/ {
	compatible = "rockchip,rk3288-evb-act8846", "rockchip,rk3288";
+	chosen {
		bootargs = "earlycon=uart8250,mmio32,0xff690000 vmalloc=496M swiotlb=1 console=ttyFIQ0 androidboot.baseband=N/A androidboot.veritymode=enforcing androidboot.hardware=rk30board androidboot.console=ttyFIQ0 init=/init kpti=0";
+	};
.......
};



++++
&firmware_android {
	compatible = "android,firmware";
	boot_devices = "ff0f0000.dwmmc";
	fstab {
		compatible = "android,fstab";
		vendor {
			compatible = "android,vendor";
			dev = "/dev/block/by-name/vendor";
			type = "ext4";
			mnt_flags = "ro,barrier=1,inode_readahead_blks=8";
			fsmgr_flags = "wait";
		};
	};
};

修改后,需要重新编译系统,重新烧写镜像,只编译kernel或者只烧写boot.img是不生效的。
++++

说明:
(1)rk3288-evb-android-act8846-lvds.dts 文件原名为:rk3288-evb-android-act8846-edp.dts,
是我修改成 rk3288-evb-android-act8846-lvds.dts 的,为了同我们使用的产品名一致。
(2)如果按照文档编译,在这个步骤是不会发生的:

文档编译:

$ cd kernel
$ make ARCH=arm rockchip_defconfig
$ make ARCH=arm rk3288-evb-android-rk808-edp-avb.img -j12

我的编译:
$ cd kernel
$ make ARCH=arm rockchip_defconfig	
$ make ARCH=arm rk3288-evb-android-act8846-lvds.img -j8
3.正常终端:

[   35.855418] init: Untracked pid 1274 exited with status 0
[   35.863164] init: Untracked pid 1282 exited with status 0
[   35.890980] Using Buffer DMA mode
[   35.891006] Periodic Transfer Interrupt 
console:/ $ Enhancement - disabled
[   35.891012] Multiprocessor Interrupt Enhancement - disabled
[   35.891017] OTG VER PARAM: 0, OTG VER FLAG: 0
[   35.891021] ^^^^^^^^^^^^^^^^^Device Mode
[   35.895223] *******************soft connect!!!*******************
[   35.992238] USB RESET

console:/ $ [   36.093820] android_work: sent uevent USB_STATE=CONNECTED
[   36.116599] configfs-gadget gadget: high-speed config #1: b
[   36.116847] android_work: sent uevent USB_STATE=CONFIGURED

console:/ $ 
console:/ $ 
console:/ $ 
console:/ $ 
console:/ $ 
console:/ $ 

;